PIC16F819 Microcontroller in Pakistan

The PIC16F819 Microcontroller belongs to the Mid-Range family
of the PICmicro® devices. The devices differ from each
other in the amount of Flash program memory, data
memory and data EEPROM (see Table 1-1). A block
diagram of the devices is shown in Figure 1-1.

Features:

These
devices contain features that are new to the PIC16
product line:

• Internal RC oscillator with eight selectable
frequencies, including 31.25 kHz, 125 kHz,
250 kHz, 500 kHz, 1 MHz, 2 MHz, 4 MHz and
8 MHz.

The INTRC can be configured as the
system clock via the configuration bits. Refer to
Section 4.5 “Internal Oscillator Block” and
Section 12.1 “Configuration Bits” for further
details.

Timer 1 module:

• The Timer1 module current consumption has
been greatly reduced from 20 μA (previous PIC16
devices) to 1.8 μA typical (32 kHz at 2V), which is
ideal for real-time clock applications. Refer to
Section 6.0 “Timer0 Module” for further details.
• The amount of oscillator selections has increased.
The RC and INTRC modes can be selected with
an I/O pin configured as an I/O or a clock output
(FOSC/4). An external clock can be configured
with an I/O pin. Refer to Section 4.0 “Oscillator
Configurations” for further details.

• Timer0: 8-bit timer/counter with 8-bit prescaler
• 16-bit timer/counter with prescaler, can be
incremented during Sleep via external crystal/clock.

Special Microcontroller Features:

• High sink/source current: 25 mA
• Timer2: 8-bit timer/counter with 8-bit period
register, prescaler and postscaler
• 100,000 erase/write cycles Enhanced Flash
program memory typical
• 1,000,000 typical erase/write cycles EEPROM
data memory typical
• EEPROM Data Retention: > 40 years
• In-Circuit Serial ProgrammingTM (ICSPTM) via two pins

Peripheral Features:

• 16 I/O pins with individual direction control
• Capture, Compare, PWM (CCP) module:
– Capture is 16-bit, max. resolution is 12.5 ns
– Compare is 16-bit, max. resolution is 200 ns
– PWM max. resolution is 10-bit
• 10-bit, 5-channel Analog-to-Digital converter
• Synchronous Serial Port (SSP) with
SPI™ (Master/Slave) and I2C™ (Slave)

• And Low-Voltage Programming
• Debugging via two pins

Packages Include:

1 × PIC16F819 Microcontroller

There are several types of internal links. In addition to links on your homepage, menu, post feed, etc, you can also add links within your content. We call those contextual links. Contextual links point your users to interesting and related content. Moreover, they allow search engines to find out what content on your site is