This 35W Class D TDA8932 Audio Amplifier uses a high-performance digital TDA8932 chip, high efficiency, high power, high-quality sound, without additional installation of heat sink, very suitable for the transformation of active speakers, electro-acoustic project implementation, product development and other audio applications.
TDA8932 based Audio Amplifier is a digital mono audio amplifier module that provides 35 Watt output.
This board uses a high-performance digital amplifier TDA8932 chip. Due to the small size, it is easily mounted
in any small space-based DIY audio amplifier project. It has high efficiency, high power, good sound quality
without additional installation of a radiator. Very suitable for the transformation of active speakers,
electroacoustic project implementation, product development, and other audio applications.
Pin Description of TDA8932:
|INPUT +||Positive Input|| |
Audio Input – Mono Signal
|INPUT –||Negative Input (GND)|
|BTL OUT +||Positive Output|| |
35W BTL output for Speaker
|BTL OUT –||Negative Output (GND)|
|POWER +||Power Positive|| |
10V – 30V (Recommended 24V)
|POWER –||Power Negative (GND)|
Current: More than 2A is required
Power output: 35W ×1 (mono)
Circuit Configuration: Mono BTL output
PCB board size: 45 × 31 MM
- 35W mono digital amplifier module
- Operating voltage: 10V – 15VDC(Also check IC datasheet on google)
- Recommended speaker impedance: 8 ohm Best (4 ohm or 6 ohm also works)
TDA7279 (15W + 15W), TPA3118 (60W)
TDA8932 Based Amplifier Board Module – Overview:
TDA8932 based Amplifier board module is a digital mono amplifier module that provides 35 Watt BTL output. The operating voltage requires a minimum of 10V to a maximum of 30V DC input. This amplifier also supports 4 Ohms to 8 Ohms of speakers that can be directly driven. However, for the best performance, it is recommend to use 24V DC input with an 8 Ohms speaker output. The on-board chip TDA8932 provides high efficiency and does not require any additional heatsinks. It is also call as Bluetooth audio amplifier board tda8932 2x15w since it is use in Bluetooth audio applications.
At full output, the module requires more than 2A of current and switching power supply is recommend to get trouble-free operations.
1 x 35W Class D TDA8932 Audio Amplifier
Interfacing of the TDA8932 Amplifier board is easy. The output can directly connect with the 35W speaker. It is important to use a 35-Watt speaker with this amplifier module. Also, the power input can directly solder with the power input pin. It is also important to use power supply less than 30V rating with a minimum of 2A current rating.
- Public address system
- Sound reinforcement system
- In domestic uses such as home- theatre system
- Instrument amplifier including guitar amplifier or keyboard amplifier
The dimensions of the TDA8932 Based Amplifier module is shown below.