With the wide applications of semiconductor cooling, more and more DIY enthusiasts are interested in it. It’s a question that how to make refrigerating capacity to a more great extent in water-cooling applications. This DIY Thermoelectric Peltier Cooler kit could be just to your taste.

Features:

1. Adopt TEC1-12706 semiconductor chilling plate, good quality for use.
2. Complete sealed structure, isolating the moisture in the air.
3. Higher reliability than others.
4. Include 1*TEC1-12706, 1*conduction cool module, 1*water block, 1*fan, 1*thermal grease, 1*base board and a pack of screws.
5. Lightweight and mini in size, easy to install.
6. Great DIY kit for electronic enthusiasts in semiconductor cooling applications.

Note:

1. The conduction cool module can frost when the temperature is under -25°C.
2. TEC1-12706: one side with words is the refrigeration side, the other side is heat dissipation side.
3. Must install heat sink or water-cooled radiator on the heat dissipation side; otherwise will burn the Peltier.
4. The DC power is not included in this kit, please prepare it by yourself.

Specifications:

1. Semiconductor Chilling Plate: TEC1-12706
2. Size: 40 * 40 * 3.75mm
3. Internal Resistance: 2.1~2.4Ω
4. Max. Temperature Difference: 67°C Above
5. Rated Voltage: 12V(Vmax. 15V, Starting Current 5.8A)
6. Working Current: Imax.=4~4.6A(Rated 12V)
7. Refrigeration Power: Max. 50~60W
8. Working Environment: -55~83°C
9. Sealing Process: Standard 704 silicon rubber sealing all sides
10. Fan: DC 12V
11. Conduction Module Size: 60 * 45 * 21mm
12. Water Block Size: 40 * 40 * 12mm
13. Fan Size: 40 * 40 * 10mm
14. Size: 12 * 9 * 7cm / 4.72 * 3.54 * 2.75in
15.  Weight: 211g / 7.44oz

Package Includes:

• 2 * Conduction Module/Heat sink
• 1 * Water Block
• 2 * TEC1-12706
• 2 * Fan
• 1 * Pack of Screws

The conduction cool module can frost when the temperature is under -25°C.

TEC1-12706: one side with words is the refrigeration side, the other side is heat dissipation side.

Must install heat sink or water-cooled radiator on the heat dissipation side; otherwise will burn the Peltier.

The DC power is not included in this kit, please prepare it by yourself.