Description

This is a Half bridge Load Cell Sensor, which is widely use in weight scales. When the half-bridge stretch,

It sends signal via the red signal wire. You can use multiple load sensors simultaneously to increase the capacity range.
Two sensors full-bridge measurements: 50kgx2=100kg
Four sensor full-bridge measurements: 50kgx4=200kg
Parallel use to add additional capacity.

Four lead wires, easy to use, plus driving voltage 5-10V, force changes in the output voltage signal directly.
Installation: Sensor end through the screw hole fixed and the other end left floating state, according to the label indicates the direction of the gravitational force exerted particular attention must not directly push the white plastic cover part of the sensor in order to avoid damage.
Weighing Load Cell Sensor 50kg For Electronic YZC-133 With Wires.

This is a half-bridge load sensor, which is widely use in weight scales. When the half-bridge stretchs. Sends signal via the red signal wire. You can use multiple load sensors simultaneously to increase the capacity range.

Features:

Two sensors full-bridge measurements: 50kgx2=100kg
Four sensor full-bridge measurements: 50kgx4=200kg
Parallel use to add additional capacity

Specification:

- Capacity (kg): 50
- Comprehensive error (%F.S): 0.10
- Output sensitivity (mv/V): 1.0±0.15%
- Non linearity (%F.S): 0.05
- Repeatability (%F.S): 0.05
- Hysteresis (%F.S): 0.05
- Creep (%F.S/3min): 0.1
- Zero Drift (%F.S/1min): 0.1
- Temp. Effect on zero (%F.S/10°C): 0.3
- Temp. Effect on Output (%F.S/10°C): 0.1
- Zero Output (mv/V): ±0.3
- Input Resistance (?): 1000±10
- Output Resistance (?): 1000±10
- Insulation Resistance (M?): ?2000 (100VDC)
- Excitation Voltage (V): 10
- Operation Temp. Range (°C): -10~+50
- Overload Capacity (%F.S): 150
- Method of connecting wire: Red= Sig + ; White= Exc –; Black= Exc +
- Dimension (mm): 34*34*8