© Copyright 2026. All Rights Reserved
NANOESP32-C6 Development Board – Wi-Fi 6, Zigbee, Thread, Dual USB-C, 4MB Flash & RGB LED
Availability:
In stock
Rs.1,800.00
NANOESP32-C6 Development Board – Wi-Fi 6, Zigbee, Thread & Dual USB-C
Compact Wireless Development Platform for Next-Generation IoT Projects
Build advanced connected devices with the NANOESP32-C6 Development Board, powered by Espressif's ESP32-C6-WROOM-1-N4 module.
Designed for embedded development, wireless communication and smart-home applications, this compact board combines 2.4GHz Wi-Fi 6, Bluetooth Low Energy, Zigbee 3.0 and Thread 1.3 connectivity.
Its 32-bit RISC-V processor architecture, 4MB SPI Flash, dual USB Type-C interfaces and onboard addressable RGB LED provide a practical development platform for engineers, makers, students and IoT developers.
Whether you are developing wireless sensors, smart-home controllers, connected devices or embedded prototypes, the NANOESP32-C6 offers multiple wireless communication technologies in one compact board.
Key Features
1. ESP32-C6 RISC-V Processor
Powered by the Espressif ESP32-C6, featuring a 32-bit RISC-V high-performance processor operating at up to 160MHz and a low-power processor operating at up to 20MHz.
2. Wi-Fi 6 Wireless Connectivity
Supports 2.4GHz Wi-Fi 6 based on IEEE 802.11ax, with backward compatibility for IEEE 802.11b/g/n networks.
3. Bluetooth 5.3 Low Energy
Integrated Bluetooth 5.3 LE connectivity supports wireless communication, compatible BLE devices and connected sensor applications.
4. Zigbee 3.0 and Thread 1.3
The integrated IEEE 802.15.4 radio supports Zigbee 3.0 and Thread 1.3, making the board suitable for compatible smart-home and IoT networking projects.
5. Dual USB Type-C Interfaces
Two USB Type-C connections provide separate development interfaces:
-
USB-to-UART interface using the CH343P bridge for serial communication and firmware flashing.
-
Native USB Serial/JTAG interface for programming, monitoring and debugging workflows.
6. Onboard Addressable RGB LED
An integrated addressable RGB LED connected to GPIO8 allows visual status indication and LED programming without requiring an external LED module.
7. BOOT and Reset Buttons
Dedicated BOOT and RST buttons support manual boot-mode selection and board resetting.
8. Breadboard-Friendly Header Layout
The compact Nano-style form factor and 2.54mm header pitch make it convenient to integrate the board into electronics prototypes and development setups.
Technical Specifications
| Parameter | Specification |
|---|---|
| Product Name | NANOESP32-C6 |
| Main Module | ESP32-C6-WROOM-1-N4 |
| Manufacturer of Module | Espressif Systems |
| Processor | 32-bit RISC-V |
| High-Performance CPU | Up to 160MHz |
| Low-Power CPU | Up to 20MHz |
| Flash Memory | 4MB SPI Flash |
| PSRAM | Not included |
| Wi-Fi | Wi-Fi 6 |
| Wi-Fi Frequency | 2.4GHz |
| Wi-Fi Standard | IEEE 802.11ax |
| Bluetooth | Bluetooth 5.3 LE |
| Zigbee | Zigbee 3.0 |
| Thread | Thread 1.3 |
| Wireless Standard | IEEE 802.15.4 |
| USB Interfaces | 2 × USB Type-C |
| USB-to-UART Bridge | CH343P |
| Native USB | USB Serial/JTAG |
| RGB LED | 1 × Addressable RGB LED |
| RGB LED GPIO | GPIO8 |
| Buttons | BOOT and RST |
| Header Pitch | 2.54mm |
| Antenna | Onboard PCB antenna |
| Development Framework | ESP-IDF |
Typical Applications
Smart Home Automation
Develop compatible Zigbee and Thread smart-home devices, wireless controllers and connected automation prototypes.
IoT Sensor Networks
Build wireless sensor nodes for monitoring temperature, environmental conditions and other connected applications.
Wireless Communication Projects
Experiment with Wi-Fi 6, Bluetooth LE and IEEE 802.15.4 wireless communication.
Smart Lighting Systems
Develop compatible wireless lighting controllers and RGB LED applications.
Embedded Systems Development
Explore RISC-V programming, GPIO interfacing, firmware development and embedded communication protocols.
USB Development and Debugging
Use the dual USB Type-C interfaces for serial communication, programming and native USB debugging workflows.
Development Environment
The NANOESP32-C6 can be developed using the Espressif ESP-IDF framework.
Arduino IDE and other supported development environments can also be used with appropriate ESP32-C6 board support and software configuration.
For ESP-IDF development, configure the target as:
esp32c6
Official resources:
ESP32-C6 Datasheet:
https://documentation.espressif.com/esp32-c6_datasheet_en.html
ESP32-C6-WROOM-1 Datasheet:
https://documentation.espressif.com/esp32-c6-wroom-1_wroom-1u_datasheet_en.html
Why Choose NANOESP32-C6?
The NANOESP32-C6 combines several wireless communication technologies in one compact embedded development board.
Its dual USB Type-C interfaces provide convenient programming and debugging options, while the integrated RGB LED and BOOT/RESET buttons make development and prototyping easier.
It is a practical choice for developers exploring modern IoT communication, smart-home networking and RISC-V-based embedded applications.
Explore Related Products at Electronics Hub
Looking for other ESP32 development platforms?
Explore these related products:
-
WROOM ESP32 WiFi Microcontroller Development Board: A popular option for conventional ESP32 Wi-Fi and Bluetooth development.
https://electronicshub.pk/product/wroom-esp32-wifi-based-microcontroller-development-board/ -
ESP32-CAM WiFi + Bluetooth Camera Development Board: For wireless camera, image transmission and monitoring applications.
https://electronicshub.pk/product/esp32-cam-wifi-bluetooth-camera-module-development-board-esp32-with-camera-module-ov2640-for-arduino-in-pakistan/ -
ESP-EYE ESP32 AI Development Board: Explore camera-based face detection and voice-related development applications.
https://electronicshub.pk/product/esp-eye-esp32-wi-fibluetooth/
Order NANOESP32-C6 from Electronics Hub
Bring your wireless development ideas to life with a compact board designed for modern IoT and embedded applications.