© Copyright 2026. All Rights Reserved
4S 12V 100A LiFePO4 BMS Battery Protection Circuit Board – 3.2V Cells
Availability:
In stock
Rs.4,400.00
Build a 12V LiFePO4 battery pack with the 4S 100A Battery Protection Circuit Board, designed for four lithium iron phosphate cells connected in series.
This battery management system is listed for a 4S configuration using 3.2V nominal LiFePO4 cells, creating a 12.8V nominal battery pack. The product listing specifies a 100A continuous discharge rating and protection functions for overcharging, over-discharging, overcurrent and short circuits.
The BMS is intended for battery-pack protection in suitable 4-cell LiFePO4 applications. Before installation, confirm the board's exact charging-current rating, wiring arrangement, cell-voltage thresholds and physical dimensions against the supplied product documentation.
Key Features
-
4S battery configuration: Designed for a four-cell series LiFePO4 battery pack.
-
12.8V nominal battery voltage: Based on four 3.2V nominal LiFePO4 cells.
-
100A continuous discharge rating: As stated in the matching product listing.
-
Battery protection: Listed overcharge, over-discharge, overcurrent and short-circuit protection.
-
LiFePO4 chemistry: Intended for lithium iron phosphate cells.
-
Battery pack integration: Suitable for appropriately configured 4S battery projects.
Technical Specifications
| Specification | Confirmed listing data |
|---|---|
| Product type | Battery Management System (BMS) |
| Battery configuration | 4S |
| Battery chemistry | LiFePO4 / LFP |
| Cell nominal voltage | 3.2V |
| Pack nominal voltage | 12.8V (marketed as 12V) |
| Continuous discharge current | 100A |
| Protection functions | Overcharge, over-discharge, overcurrent, short circuit |
Applications
Potential applications for a correctly matched 4S LiFePO4 BMS include:
-
12.8V LiFePO4 battery pack projects
-
Solar energy storage battery packs
-
Off-grid battery systems
-
Backup power battery projects
-
DIY lithium battery pack builds
Important: These are application categories, not a guarantee that the board is suitable for every solar system, vehicle or battery pack. Verify the system's current demand, cell specifications and BMS wiring before use.
Installation Notes
-
Use only with a compatible 4S LiFePO4 battery pack.
-
Confirm the battery cell order and BMS connection diagram before wiring.
-
Check positive and negative polarity carefully.
-
Do not assume the 100A discharge rating is also the charging-current rating.
-
Use suitable conductors, insulation and protection for the actual system current.
-
Do not connect the board to a different lithium chemistry based only on its 4S configuration.
-
Installation should be performed by someone familiar with lithium battery systems.
Related Products
Explore battery components for your project:
These links are related battery products. They are not confirmed compatible with this LiFePO4 BMS. Match battery chemistry and pack configuration before purchasing.