150W DC-DC Boost Converter 10–32V to 12–35V 6A Adjustable Step-Up Module

Upgrade your DC power projects with the 150W DC-DC Adjustable Boost Converter Module. Designed to increase a lower DC input voltage to a higher adjustable output voltage, this module provides a flexible power conversion solution for automotive electronics, laptop power projects, robotics, and DIY electronics applications.

With a 10V–32V DC input range and adjustable 12V–35V DC output, this non-isolated step-up converter is suitable for projects that require a higher DC voltage from an existing power source.

The module supports an advertised maximum output current of 6A and up to 150W output power with enhanced heat dissipation. Under natural cooling, the reported maximum output power is 100W.

Key Features

• Wide DC Input Range: Accepts 10V–32V DC input.

• Adjustable Output Voltage: Provides adjustable 12V–35V DC output.

• High Power Conversion: Advertised output power up to 150W with enhanced cooling.

• Maximum Output Current: Rated up to 6A, subject to operating conditions.

• High Conversion Efficiency: Up to 94% reported under specified test conditions.

• Non-Isolated Boost Design: Increases DC voltage without electrical isolation between input and output.

• Adjustable Voltage: Onboard adjustment control allows output voltage setting.

• Practical Power Solution: Suitable for automotive, robotics, laptop power and electronic prototyping projects.

Technical Specifications

Power Output and Cooling Requirements

This module is advertised for up to 150W output power. Its actual power capability depends on input voltage, output voltage, load current and thermal conditions.

• Natural cooling: Up to 100W reported.

• Enhanced heat dissipation: Up to 150W reported.

• Additional cooling is recommended for higher-power operation.

• Do not operate the module beyond its rated electrical and thermal limits.

Typical Applications

1. Automotive DC Power Conversion

Use a compatible 12V vehicle electrical source to generate a higher adjustable DC voltage for suitable electronic equipment.

2. Laptop Power Projects

Convert a suitable 12V DC supply into a higher voltage, such as 19V, for compatible laptop power applications. Verify the laptop's required voltage, polarity and power rating before connecting.

3. Robotics and Motor Projects

Provide a higher DC supply voltage for compatible motors and robotics circuits. Ensure the motor's current requirements are within the converter's capabilities.

4. Adjustable DC Power Supply

Build a custom adjustable DC power source for electronics testing and prototyping.

5. Battery-Powered Projects

Increase the voltage from a suitable DC battery source to power compatible higher-voltage electronic circuits.

6. Communication Equipment

Use in compatible DC power conversion projects requiring a higher voltage supply.

Input and Output Connection Guide

The module uses separate input and output connections.

• Input Positive (IN+): Connect to the positive DC power source.

• Input Negative (IN−): Connect to the negative DC power source.

• Output Positive (OUT+): Connect to the positive terminal of the load.

• Output Negative (OUT−): Connect to the negative terminal of the load.

Always verify the terminal markings on your actual module before wiring.

Installation and Safety Precautions

1. Use a DC input supply within the specified 10V–32V range.

2. Observe correct input polarity.

3. Adjust and measure the output voltage before connecting your load.

4. Never set the output voltage lower than the input voltage for step-up operation.

5. Install an appropriately rated input-side fuse.

6. Add suitable reverse-polarity protection.

7. Provide adequate ventilation and heat dissipation.

8. Use wires and connectors rated for the expected current.

9. Do not short-circuit the output.

10. Avoid operating continuously at maximum advertised ratings without appropriate thermal testing.

Important: This module is reported to have no built-in short-circuit protection and no input reverse-polarity protection. External protection is required.

Package Includes

• 1 × 150W DC-DC Boost Converter 10–32V to 12–35V 6A Step-Up Module

Explore Related DC-DC Converter Modules

Explore more power conversion solutions from Electronics Hub:

• Adjustable LTC1871 100W Boost Converter

• XL6009 DC-DC Boost Converter

• MT3608 DC-DC Boost Converter

• LM2577 / LM2596 DC-DC Converter Modules

Find the right power conversion module for your next electronics project at Electronics Hub.

Electronics Hub – We Display with Pride.