© Copyright 2026. All Rights Reserved
Power your compatible electronics projects with the 1500mAh 3.7V 18650 Lithium-Ion Battery with Wire and JST Connector.
This rechargeable single-cell battery is designed for compatible 3.7V electronics, DIY projects and portable devices. Its 18650 format provides a compact power source, while the attached wires and connector make integration into compatible circuits more convenient.
The battery is advertised with a 1500mAh capacity and a nominal voltage of 3.7V. It reaches approximately 4.2V when fully charged using a standard lithium-ion charging profile.
The product is listed with a JST connector and attached wires. A protection circuit is advertised by the supplier, but the exact protection functions should be confirmed on the actual battery stock before relying on them.
Check your device's voltage range, current requirement, connector type and polarity before connecting this battery.
1500mAh Capacity: Suitable for compatible rechargeable electronics and DIY projects.
3.7V Nominal Voltage: Designed for compatible single-cell lithium-ion applications.
18650 Cell Format: Common cylindrical battery format for portable electronics.
Rechargeable Lithium-Ion Chemistry: Supports repeated charging with a compatible charger.
Attached Wires: Helps simplify connection to compatible circuits.
JST Connector: Connector advertised by the supplier; verify exact pitch and polarity.
BMS / Protection Advertised: Supplier describes protection circuitry; confirm actual protection functions.
Compact Battery Design: Suitable for compatible project enclosures and portable applications.
| Specification | Details |
|---|---|
| Product Type | Rechargeable Li-ion Battery |
| Cell Format | 18650 |
| Configuration | 1S1P |
| Nominal Voltage | 3.7V |
| Full-Charge Voltage | 4.2V |
| Rated Capacity | 1500mAh |
| Nominal Energy | Approximately 5.55Wh |
| Connector | JST connector, advertised as 1.5mm |
| Wire Length | Approximately 3 inches, supplier-listed |
| Protection Circuit | BMS/protection advertised; verify actual stock |
| Continuous Load Guidance | Supplier recommends approximately 1A or lower |
| Charger | Compatible 4.2V lithium-ion charger required |
| Package Includes | 1 × 1500mAh 3.7V 18650 battery with wire and connector |
Specifications are based on retailer listings. Verify capacity, connector pitch, wire length, protection circuit and current limits for the actual product batch.
Compatible Arduino and electronics projects
DIY portable electronics
Low-power sensors and monitoring circuits
Compatible LED projects
Small robotics and educational projects
Battery-powered prototypes
Compatible handheld electronics

Use a charger designed for a single-cell lithium-ion battery with a 4.2V charging endpoint.
Do not use NiMH, NiCd or lead-acid charging settings.
Confirm the connector polarity before connecting the battery.
Check your device's operating voltage and current requirements.
Do not short-circuit, crush, puncture, bend or disassemble the battery.
Do not charge or operate a damaged, swollen or unusually hot battery.
Charge and use the battery under appropriate supervision and according to the supplier's instructions.
Do not rely on BMS protection unless the protection circuit is confirmed on the actual product.

Important: This is a rechargeable battery, not a charger. The actual protection circuitry and current capability depend on the supplied battery version.
1 × 1500mAh 3.7V 18650 Li-ion Battery with Wire and JST Connector
Charger and additional accessories are not included unless specifically stated.