Description
Description
The can rotate approximately 180 degrees (90 in each direction) and works just like the standard kinds but smaller. You can use any servo code, hardware, or library to control these servos. Good for beginners who want to make stuff move without building a motor controller with feedback & gearbox, especially si (arms) and hardware. The TowerPro MG90S Servo Motor now features digital processing for greater precision. Same great performance, now with digital precision.
Features:
- Tiny and lightweight with high output power.
- Tiny servo MG90S is perfect for RC Airplane, Helicopter, Quadcopter or Robot.
- Has metal gears for added strength and durability.
- Easy to work with no need to program.
- This servo motor can be used directly with Arduino’s servo motor libraries.
Specifications:
- Item Name: MG90S servo
- Weight: about 13.4g
- Dimension: 22.8 x 12.2 x 28.5mm
- Stall Torque: 1.8kg/cm(4.8V ),2.2kg/cm(6V)
- Operating Speed: 0.1sec/60degree(4.8v), 0.08sec/60degree(6v)
- Operating Voltage: 4.8-6.0V
- Motor Type: coreless motor
Package Include
1 x Towerpro MG90S Servo Motor
Testing Code
#include <Servo.h>
Servo servo;
int angle = 10;void setup() {
servo.attach(8);
servo.write(angle);
}void loop()
{
// scan from 0 to 180 degrees
for(angle = 10; angle < 180; angle++)
{
servo.write(angle);
delay(15);
}
// now scan back from 180 to 0 degrees
for(angle = 180; angle > 10; angle–)
{
servo.write(angle);
delay(15);
}
}Item Name: MG90S servo
Weight: about 13.4g
Dimension: 22.8 x 12.2 x 28.5mm
Stall Torque: 1.8kg/cm(4.8V ),2.2kg/cm(6V)
Operating Speed: 0.1sec/60degree(4.8v), 0.08sec/60degree(6v)
Operating Voltage: 4.8-6.0V
Motor Type: coreless motor
Connector Wire Length : 175mmFeatures:
Micro size
Great for truck, Boat, Racing Car, Helicopter and AirplanePackage Included:
Towerpro MG90S Mini Digital 180 Degree Servo 2.2kg 0.08sec 13g#include <Servo.h>Servo servo;
int angle = 10;void setup() {
servo.attach(8);
servo.write(angle);
}void loop(){// scan from 0 to 180 degreesfor(angle = 10; angle < 180; angle++)
{servo.write(angle);delay(15);}// now scan back from 180 to 0 degreesfor(angle = 180; angle > 10; angle–){servo.write(angle);delay(15);}}
Reviews
There are no reviews yet.