© Copyright 2026. All Rights Reserved
Build a reliable 3-cell lithium-ion battery pack with the HW-544 3S Battery Protection Board, designed for compatible 11.1V nominal and 12.6V fully charged lithium-ion battery packs.
This battery management and protection module is designed to help protect the battery pack during charging and discharging. Its advertised protection functions include overcharge, over-discharge, overcurrent and short-circuit protection. The balanced version also includes an equalization function to help maintain voltage balance between the three series-connected cell groups.
Suitable for compatible 18650, 26650 and lithium polymer battery packs, this compact PCB is useful for DIY battery projects, portable equipment and compatible power applications.
Important: The 60A rating and charging-current limits are supplier-advertised values. Actual allowable current depends on the exact board version, cooling, wiring, battery cells and installation. Verify the current rating before connecting a high-power load.

3S Lithium-Ion Protection: Designed for three lithium-ion cell groups connected in series.
11.1V Nominal Battery Pack: Suitable for compatible 3S lithium-ion packs.
12.6V Full-Charge Pack: Based on standard 4.2V maximum charge voltage per cell group.
Equalization Function: Balanced version includes a balancing circuit for the three series cell groups.
Battery Protection: Advertised overcharge, over-discharge, overcurrent and short-circuit protection.
High-Current Design: 60A discharge rating advertised by sellers; verify continuous operating current for your specific board.
Multiple Cell Formats: Compatible cell formats advertised include 18650, 26650 and lithium polymer cells, when configured correctly.
Compact PCB: Suitable for integration into compatible battery-pack projects.
| Specification | Details |
|---|---|
| Product Model | HW-544 / BMS-60A-3S |
| Battery Configuration | 3S |
| Battery Chemistry | Standard Li-ion, 3.7V nominal / 4.2V full-charge cells |
| Nominal Pack Voltage | 11.1V |
| Full-Charge Pack Voltage | 12.6V |
| Advertised Discharge Rating | 60A; verify continuous rating |
| Advertised Charging Current | Up to 15A; verify exact version |
| Balancing | Yes, balanced version |
| Protection Functions | Overcharge, over-discharge, overcurrent and short circuit |
| Cell Compatibility | Compatible 18650, 26650 and lithium polymer cells |
| PCB Dimensions | Approximately 41–42 × 55–62mm, depending on version |
| Package | 1 × HW-544 3S battery protection board |
DIY 3S lithium-ion battery packs
Compatible electric drill battery projects
Portable battery-powered equipment
Battery-powered LED projects
Compatible small power systems
Electronics and battery-management experiments

Confirm that the board is the correct 3S version for your battery chemistry.
Use three compatible cell groups with closely matched capacity and internal resistance.
Connect the battery group taps in the exact order shown in the board's wiring diagram.
Use a compatible 12.6V lithium-ion charger.
Confirm the supplier's continuous discharge and charging-current limits before use.
Use suitable wire thickness, insulation and heat management.
Do not intentionally short circuit the board or battery.
Do not connect the board to a 4S pack or a battery chemistry with different voltage requirements.


This module is a battery protection board, not a standalone battery charger. Correct wiring and a compatible charger are required.
1 × HW-544 3S 60A Lithium Battery Protection Board with Equalization
Package contents may vary by supplier.