© Copyright 2026. All Rights Reserved
6-24V to 5V 3A USB DC-DC Buck Converter Module – Car Charger
Availability:
In stock
Rs.155.00
USB DC-DC Buck Converter 6–24V to 5V 3A
The USB DC-DC Buck Converter is a compact step-down power supply module designed to convert a 6V–24V DC input into a regulated 5V USB output. It provides a convenient solution for powering or charging compatible USB devices from 12V and 24V DC power sources.
Featuring a USB Type-A output port, this module is suitable for automotive electronics, DIY USB charging projects, embedded systems and other applications requiring a 5V power supply.
Key Features
-
Wide Input Voltage: Supports DC input from 6V to 24V.
-
5V USB Output: Provides approximately 5.1V–5.2V output according to the matching product specifications.
-
Maximum Output Current: Up to 3A maximum; 2.1A is specified for extended operation.
-
USB Type-A Interface: Convenient connection for compatible USB devices.
-
Synchronous Buck Conversion: Designed for efficient step-down voltage conversion.
-
Protection Features: Input reverse-polarity protection, output overvoltage protection and output short-circuit protection are specified.
-
Compact Design: Small circuit-board module suitable for space-constrained projects.
Technical Specifications
| Parameter | Specification |
|---|---|
| Module Type | DC-DC Buck Converter |
| Input Voltage | 6–24V DC |
| Output Voltage | 5.1–5.2V DC |
| Maximum Output Current | 3A |
| Extended Operation Current | 2.1A |
| Switching Frequency | 500kHz |
| Conversion Efficiency | Up to 97.5% (under specified test conditions) |
| Static Current | 0.85mA |
| Load Regulation | ±1% |
| Voltage Regulation | ±0.5% |
| Output Interface | USB Type-A |
| Dimensions | 26.4 × 15 × 7.4mm |
Applications
-
Automotive USB charging projects
-
12V and 24V DC power systems
-
DIY USB power supply projects
-
Embedded electronics
-
USB-powered development boards
-
Compatible 5V electronic devices
Installation Instructions
-
Identify the positive and negative DC input connections.
-
Connect a regulated DC source within the 6–24V input range.
-
Check input polarity before powering the module.
-
Connect your compatible USB device to the USB output.
-
Verify the output voltage and current requirements before use.
Important Safety Information
-
Do not exceed the specified input voltage.
-
Observe correct input polarity.
-
Do not exceed the module's maximum output current.
-
Provide suitable ventilation when operating under higher loads.
-
Avoid prolonged output short circuits.
-
Confirm that the connected device supports the module's USB output voltage.
Related Products
Looking for other DC power conversion solutions? Explore our related products:
Package Includes: 1 × USB DC-DC Buck Converter Module (6–24V to 5V).