Description

264×176 Resolution 2.7 Inch e-Paper Display HAT E-Ink Screen

This STM32 module incorporates HAT E-Ink Screen technology with SPI Interface for Embedded Controller.

The primary target of this LCD display module is small footprint computers or controllers

like Raspberry Pi 2B, 3B, Zero, Zero W, Arduino, STM32 etc.

Core features of the module include:

  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Compatible with Raspberry Pi 2B/3B/3B+/Zero/Zero W
  • SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
  • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

264×176 Resolution 2.7 Inch e-Paper Display HAT E-Ink Screen for Raspberry Pi, three-color, SPI interface

This is an E-Ink display HAT for Raspberry Pi, 2.7inch, 264×176 resolution, with embedded controller,

communicating via SPI interface.

Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight,

it is an ideal choice for applications
such as shelf label, industrial instrument, and so on.

Specifications:

  1. Operating voltage: 3.3V/5V
  2. Interface: 3-wire SPI, 4-wire SPI
  3. Outline dimension: 85mm x 56mm
  4. Display size: 57.288mm x 38.192mm
  5. Dot pitch: 0.217 x 0.217
  6. Resolution: 264 x 176
  7. Display color: black, white
  8. Grey level: 2
  9. Full refresh time: 6s (Do not support partial refresh)
  10. Refresh power: 24mW(typ.)
  11. Standby power: <0.017mW
  12. Viewing angle: >170°

Features:

  1. No backlight, keeps displaying last content for a long time even when power down
  2. Ultra low power consumption, basically power is only required for refreshing
  3. Compatible with Raspberry Pi 2B/3B/3B+/Zero/Zero W
  4. Onboard 4x Keys
  5. SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
  6. Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

Package includes:

  • 2.7inch e-Paper HAT x1
  • RPi screws pack (2pcs) x1

Development Resources

Wiki: 2.7inch_e-Paper_HAT

My favorite place to visit during weekends is my grandparents’ house.

It’s near the lake, where we love to fish and swim. We also often take the boat out on the lake.

My favorite place to visit during weekends is my grandparents’ house.

It’s near the lake, where we love to fish and swim. We also often take the boat out on the lake.

Additional information

Weight 0.1 kg

Reviews

There are no reviews yet.

Be the first to review “264×176 Resolution 2.7 Inch e-Paper Display HAT E-Ink Screen LCD Module SPI Interface with Embedded Controller for Raspberry Pi 2B 3B Zero Zero W/Arduino/STM32 In Pakistan”

Your email address will not be published. Required fields are marked *

four + ten =