Uncategorized

Description: The TDA2822 Dual Power Amplifier IC is a high-performance component designed for low-power audio applications. With its compact size, low distortion, and efficient power consumption, the TDA2822 is ideal for portable devices and small amplifiers. Key Features: Dual Channel Amplification: Provides power to two...

The 74LS48 feature active-high outputs for driving lamp buffers or common-cathode LEDs. They have full ripple-blanking input/output controls and a lamp test input. Display patterns for BCD input counts above 9 are unique symbols to authenticate input conditions.  Their circuits incorporate automatic leading and/or trailing-edge...

Description AMS1117 is a series of low dropout three -terminal regulators with a dropout of 1.8V at 1A load current. AMS 1117 features a very low standby current 2mA compared to 5mA of a competitor. Other than a fixed version, Vout = 1.2V, 1.5V,...

The SN54/74LS90, SN54/74LS92 and SN54/74LS93 are high-speed 4-bit ripple type counters partitioned into two sections. Each counter has a divide-by-two section and either a divide-by-five (LS90), divide-by-six (LS92) or divide-by-eight (LS93) section which are triggered by a HIGH-to-LOW transition on the clock inputs. Each section can be...

DESCRIPTION Ideally suited for interfacing between low-level logic circuitry and multiple peripheral power loads, the Series ULN20xxA/L high-voltage, high-current Darlington arrays feature continuous load current ratings to 500 mA for each of the seven drivers.  At an appropriate duty cycle depending on ambient temperature...

Description: The HCF4072B Dual 4-Input OR Gate IC is a high-quality component designed to provide reliable and efficient logic gate functionality. This versatile IC offers two independent OR gates, each with four inputs, making it ideal for a wide range of digital circuit applications....

Description: CD4013 consists of two identical, independent data-type flip-flops. Each flip-flop of CD4013 has independent data, set, reset, and clock inputs and Q and Not Q outputs. These devices can be used for shift register applications, and, by connecting Q output to the data input, for counter...

Description: The MOC3083 device consists of a GaAs infrared emitting diode optically coupled to a monolithic silicon detector performing the function of a zero voltage crossing bilateral triac driver. They are designed for use with a discrete power Triac in the interface of logic systems to equipment powered from 240...

Description: These devices provide two independent timing circuits of the NA555, NE555, SA555, or SE555 type in each package. These circuits can be operated in the astable or the monostable mode with external resistor-capacitor (RC) timing control. The basic timing provided by the RC...

Description: The 723 voltage regulator is commonly used for series voltage regulator applications. It can be used as both positive and negative voltage regulator. It has an ability to provide up to 150 mA of current to the load, but this can be increased...

The CD4069 consists of six inverter circuits and is manufactured using complementary MOS (CMOS) to achieve wide power supply operating range, low power consumption, high noise immunity, and the symmetric controlled rise and fall times. This device is intended for all general-purpose inverter applications inputs are...

Description: This device contains four independent gates each of which performs the logic OR function. The 74LS32 is a 14 Pin Quad 2-Input OR Gate IC. The 74LS32 provides four independent 2-input OR gates with standard push-pull outputs. Featured by Sharvi Electronics The device...

Description: Fully operational to +600V Tolerant to negative transient voltage dV/dt immune Gate drive supply range from to 20V Undervoltage lockout 3.3V, 5V and 15V input logic compatible Cross-conduction prevention logic Internally set deadtime High side output in phase with input Shut down input...

Description: The ULN2803A is a high-voltage, high-current Darlington transistor array. The device consists of eight npn Darlington pairs that feature high-voltage outputs with common-cathode clamp diodes for switching inductive loads. The collector-current rating of each Darlington pair is 500 mA. The Darlington pairs may...

The CD4070 contains four independent Exclusive OR gates. The CD4070 provides the system designer with a means for the direct implementation of the Exclusive-OR. The CD4070 employs complementary MOS (CMOS) transistors to achieve wide power supply operating range, low power consumption, and high noise margin, the CD4070 Exclusive OR provide basic...