{"title":"Programmers","description":"","products":[{"product_id":"st-link-v2-st-link-v2-stlink-v2-programmer","title":"ST-LINK V2 ST Link V2 STLINK V2 Programmer","description":"\u003ch3 id=\"description\" class=\"tab-list-title\"\u003eDescription\u003c\/h3\u003e\n\u003cdiv id=\"content_description\" class=\"ty-wysiwyg-content content-description\"\u003e\n\u003cdiv\u003e\n\u003cp\u003eST Link V2 Programmer For STM8 and STM32 is fully consistent with the official version, support for automatic upgrades, support the full range \u003cstrong\u003eSTM32 SWD\u003c\/strong\u003e (only 4pins including SWCLK, SWDIO, and power). A  full range STM8\u003cstrong\u003e SWIM\u003c\/strong\u003e (only 4pins including SWIM, Reset and power) download and debug.\u003c\/p\u003e\n\u003cp\u003eUse this device to send program code to the 32-bit STM32 ARM Cortex or 8-bit STM8 microcontrollers. The header for this ST-Link v2 programmer contains connections for 5V, 3.3V, SWCLK, SWDIO, SWIM, Reset (RST\/NRST), and GND.\u003c\/p\u003e\n\u003cp\u003eThe connector on the opposite side of this device is a USB connector and is intended to be plugged into the computer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYou can download the Drivers by\u003c\/strong\u003e \u003cem\u003e\u003ca href=\"http:\/\/www.st.com\/web\/en\/catalog\/tools\/PF251168\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eclicking here\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe product is available in Multiple colors Will be shipped randomly\u003cstrong\u003e. \u003c\/strong\u003eThe manufacturer may update specifications at any time without notice.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eSupports For ST-LINK V2 :\u003c\/strong\u003e\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eST-LINK Utility 2.0 and above\u003c\/li\u003e\n\u003cli\u003eSTVD 4.2.1 and above\u003c\/li\u003e\n\u003cli\u003eSTVP 3.2.3 and above\u003c\/li\u003e\n\u003cli\u003eIAR EWARM V6.20 and above\u003c\/li\u003e\n\u003cli\u003eIAR EWSTM8 V1.30 and above\u003c\/li\u003e\n\u003cli\u003eKEIL RVMDK V4.21 and above\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures :\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePCB installed inside of \u003cstrong\u003ealuminum alloy U disk\u003c\/strong\u003e \u003cstrong\u003eshell\u003c\/strong\u003e, portable, safe and reliable!\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterface definition\u003c\/strong\u003e directly marked on the shell, clear, convenient and practical!\u003c\/li\u003e\n\u003cli\u003e5V, 3.3V offers at the same time, allowing you to program your target board with both 5V and 3.3V\u003c\/li\u003e\n\u003cli\u003eShell characters using laser engraving, never fade off! Permanent clarity!\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500MA internal resettable fuse,\u003c\/strong\u003e complete protection of your expensive computer motherboard!\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed and blue color LED indicator\u003c\/strong\u003e, allowing you to always observe ST-LINK V2 working condition!\u003c\/li\u003e\n\u003cli\u003eWith 4 DuPont line, so you can easily respond to different target board line order!\u003c\/li\u003e\n\u003cli\u003eUse anti-static bag packaging.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eSWIM specific features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector\u003c\/li\u003e\n\u003cli\u003e1.65 V to 5.5 V application voltage supported on SWIM interface\u003c\/li\u003e\n\u003cli\u003e high-speed modes supported and SWIM low-speed\u003c\/li\u003e\n\u003cli\u003eSWIM programming speed rate: 9.7 Kbytes\/s in low speed and 12.8 Kbytes\/s in high speed\u003c\/li\u003e\n\u003cli\u003eSWIM cable for connection to the application\u003c\/li\u003e\n\u003cli\u003eDirect firmware update feature supported (DFU)\u003c\/li\u003e\n\u003cli\u003eStatus LED which blinks during communication with the PC\u003c\/li\u003e\n\u003cli\u003eOperating temperature 0 to 50°C\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e1 x ST-Link V2 Programmer For STM8 and STM32\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Electronics Hub","offers":[{"title":"Default Title","offer_id":54466836398393,"sku":"product-6489","price":1150.0,"currency_code":"PKR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/3623\/2249\/files\/61zgVDxC6L._SL1024_-1.jpg?v=1789236214"},{"product_id":"pickit-3-5-programmer","title":"PICKIT 3.5 Programmer in Pakistan","description":"\u003ch2\u003e\u003cspan style=\"font-size: 24px;\"\u003eDescription:\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 24px;\"\u003ePICKIT 3.5 Programmer Offline Programming Simulation PIC Microcontroller Chip: PICkit3 Microchip In-Circuit Debugger \/ Programmer uses in-circuit logic debugging built into each chip with Flash memory to provide a low-cost hardware debugger and programmer. and this is the 3.5 Upgrade Kit, the best choice! after the upgrade advantages:\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 24px;\"\u003eTutorial:\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 24px;\"\u003e\u003ca href=\"https:\/\/microcontrollerslab.com\/pickit3-upload-code-pic-microcontroller\/\"\u003ehttps:\/\/microcontrollerslab.com\/pickit3-upload-code-pic-microcontroller\/\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 24px;\"\u003eFeatures Of PICKIT 3.5 Programmer:\u003c\/span\u003e\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 24px;\"\u003eOffline programming never stops, so download more smoothly and completely conquer all versions of MPLAB, MPLAB X.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 24px;\"\u003eEach PICkit3.5 with a single serial number, MPLAB X under, can operate more Kit3.5.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 24px;\"\u003eIncrease the external power supply current, the output voltage is more stable.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 24px;\"\u003eThe interface protection is more perfect.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 24px;\"\u003eUSB (Full speed 12 Mbit \/ s host PC interface)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 24px;\"\u003eReal-time\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 24px;\"\u003eMPLAB IDE compliant execution (free download from Microchip)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 24px;\"\u003eBuilt-in over voltage \/ short circuit monitor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 24px;\"\u003eFirmware upgradable from PC \/ Web download\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 24px;\"\u003efully closed\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 24px;\"\u003ediagnostic LED ( power, busy, error)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 24px;\"\u003ethe program read\/write and microcontroller memory data\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 24px;\"\u003eclear space with verification program memory\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 24px;\"\u003eFreeze-peripherals at breakpoint\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 24px;\"\u003eprogram up to 512K byte flash with the Programmer-to-Go\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 24px;\"\u003eICSP cable included\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 24px;\"\u003ethe package includes:\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 24px;\"\u003e1Pcs PICkit3.5 PIC KIT3.5 Debugger Programmer Emulator PIC Controller Development Board 1Pcs\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 24px;\"\u003eMini USB cable\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 24px;\"\u003e1Pc-Pin flat cable\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 24px;\"\u003ePackage Includes In PICKIT 3.5\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 24px;\"\u003e PICKIT 3.5 Programmer\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 24px;\"\u003e USB cable\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 24px;\"\u003e jumper wire\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 24px;\"\u003ePICKIT 3 Programmer:\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 24px;\"\u003e\u003ca href=\"https:\/\/drive.google.com\/open?id=1Pz8YGZrxUnP6npH6dh5pSfnIo-HztG4U\"\u003eClick Me To Download  Software\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"font-size: 24px;\"\u003eDetailed Overview of PICKIT 3.5:\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003eThe \u003cb\u003e\u003cstrong\u003ePicKit3\u003c\/strong\u003e\u003c\/b\u003e is an official\u003cb\u003e\u003cstrong\u003e Programmer cum Debugger\u003c\/strong\u003e\u003c\/b\u003e from Microchip Technologies for PIC Microcontrollers.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003e\u003cspan style=\"font-weight: 500;\"\u003e\u003cb\u003e\u003cstrong\u003ePicKit 3 Pinout\u003c\/strong\u003e\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"88\"\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003e\u003cb\u003e\u003cstrong\u003ePin Number\u003c\/strong\u003e\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd width=\"142\"\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003e\u003cb\u003e\u003cstrong\u003ePin Name\u003c\/strong\u003e\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd width=\"392\"\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003e\u003cb\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"88\"\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003e1\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd width=\"142\"\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003eMCLR\/Vpp\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd width=\"392\"\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003eConnected to Master clear external reset pin of PIC to reset the MCU before programming\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"88\"\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003e2\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd width=\"142\"\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003eVDD (Target)\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd width=\"392\"\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003eTarget voltage of PIC, 5V or 3.3V\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"88\"\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003e3\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd width=\"142\"\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003eGround\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd width=\"392\"\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003eGround pin of the system\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"88\"\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003e4\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd width=\"142\"\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003ePGD\/ICSPDAT\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd width=\"392\"\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003eProgram Data(PDG) is connected to the In Circuit Serial Programming (ICSP) data pin\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"88\"\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003e5\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd width=\"142\"\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003ePGC\/ICSPCLK\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd width=\"392\"\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003eProgram Clock (PGC) is connected to In Circuit Serial Programming (ICSP) clock pin\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"88\"\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003e6\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd width=\"142\"\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003eNo connection\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd width=\"392\"\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003eThis pin is reserved for future use\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003e\u003cspan style=\"font-weight: 500;\"\u003e\u003cb\u003e\u003cstrong\u003ePICKIT 3 Features:\u003c\/strong\u003e\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003eUsed to \u003cb\u003e\u003cstrong\u003eprogram and debug PIC microcontrollers\u003c\/strong\u003e\u003c\/b\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003eEasy to interface with PC via USB cable\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003eSupports windows standard drivers\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003eHas programmer to go feature where you can program without PC\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003eBuilt-in Over Voltage and Short circuit Monitor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003eOn-board diagnostic LED’s\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 24px;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSupports all latest version of PIC and IDE’s\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003e\u003cspan style=\"font-weight: 500;\"\u003e\u003cb\u003e\u003cstrong\u003ePicKit3 Overview\u003c\/strong\u003e\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003eThe \u003cb\u003e\u003cstrong\u003ePicKit3\u003c\/strong\u003e\u003c\/b\u003e can be used with MPLAX IDE running on Windows Platform to program or debug PIC Microcontrollers that support ICSP – In Circuit Serial Programming. Meaning the PIC can be programmed with only 2-wires (2-pins) PGD and PGC excluding the power pins.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003eWhen you purchase a PicKit 3 you will also get an USB cable, CD and header pins along with it. The USB cable is used to interface the PicKit 3 with PC and CD consists of the driver for your windows to recognize the PicKit 3. Apart from that the PicKit 3 itself has some on-board diagnostic LEDs and push button.\u003c\/span\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"142\"\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003e\u003cb\u003e\u003cstrong\u003eLED\/Button\u003c\/strong\u003e\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd width=\"392\"\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003e\u003cb\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"142\"\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003ePower LED\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd width=\"392\"\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003eThis LED lights up in green colour when the PicKit3 receives power\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"142\"\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003eActive LED\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd width=\"392\"\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003eThis LED lights up in blue colour when the Picit 3 can establish a communication link to our PC\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"142\"\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003eStatus LED\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd width=\"392\"\u003e\n\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003eThis LED lights up in Yellow colour when the Pickit 3 is busy programming our PIC\u003c\/span\u003e\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003eIt also lights up in Red colour if an Error occurs in the programming process\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"142\"\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003ePush Button\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd width=\"392\"\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003eThis push button is used “Programmer-to-go” where you can program your PIC without a PC\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003e\u003cspan style=\"font-weight: 500;\"\u003e\u003cb\u003e\u003cstrong\u003eDifference between Pickit 2 and PicKit 3\u003c\/strong\u003e\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003eThe Pickit 2 is the predecessor of PicKit 3. Both do almost the same job, but Pickit 3 has some additional options and supports for latest versions of PIC. Also debugging will be a bit faster than Pickit 2. If you are a beginner, then even Pickit 2 would work fine. If you are looking for more advanced options like Logic analyzer built-in then have a look at ICD3. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003e\u003cspan style=\"font-weight: 500;\"\u003e\u003cb\u003e\u003cstrong\u003eHow to connect PicKit 3 with PIC microcontroller\u003c\/strong\u003e\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003eThe PicKit2 or PicKit3 can be used to PIC microcontrollers if the PIC supports ICSP programming. If they support ICSP programming look into their pinouts to find the Vpp, Vdd, Vss, ICSPDAT and ICSPCLK pins. The pin number of this pin will vary based on the IC package. The below image should give you a rough idea.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003eOnce you find the pins simply connect them to Pickit respectively and program or debug you device. Remember that both the PIC as well as the PicKit should be powered during programming or debugging. Also be careful with the voltage you set in software, for example using 5V to program a 3.3V PIC might damage the IC or the PicKit permanently. This \u003ca href=\"https:\/\/circuitdigest.com\/microcontroller-projects\/led-blinking-with-pic-microcontroller\"\u003eblinking tutorial\u003c\/a\u003e should help you to understand \u003cb\u003e\u003cstrong\u003ehow to use PicKit 3 to program a PIC microcontroller\u003c\/strong\u003e\u003c\/b\u003e using the MPLAB IPE Environment.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003e\u003cspan style=\"font-weight: 500;\"\u003e\u003cb\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003eProgram PIC Microcontrollers\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003eDebug PIC Microcontrollers\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003eCode dumping in production process\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003eFlashing or Firmware update.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400; font-size: 24px;\"\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"Electronics Hub","offers":[{"title":"Default Title","offer_id":54466837971257,"sku":"product-6495","price":5700.0,"currency_code":"PKR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/3623\/2249\/files\/pickit35-1.jpg?v=1789236261"},{"product_id":"sofi-eprom-bios-flash-isp-usb-programmer-sp8-a","title":"SOFI EPROM BIOS Flash ISP USB Programmer SP8-A in Pakistan","description":"\u003cdiv class=\"row-fluid\"\u003e\n\u003cdiv class=\"span13 side-grid litecheckout__cart\"\u003e\n\u003cdiv class=\"ty-product-block ty-product-detail\"\u003e\n\u003cdiv id=\"tabs_content\" class=\"cm-tabs-content ty-tabs__content clearfix\"\u003e\n\u003cdiv id=\"content_description\" class=\"ty-wysiwyg-content content-description\"\u003e\n\u003ch2\u003e\u003cstrong\u003eFeatures Of Best BIOS SOFI EPROM BIOS Flash ISP USB Programmer SP8-A:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUSB2.0 communication interfaces (real USB interfaces, not USB to serial ports or simulated USB ports).\u003c\/li\u003e\n\u003cli\u003eExquisite shells customized with opening moulds (cannot be caught by public-mould shells on the market), small (size: 103x71x23mm), and convenient to use and carry.\u003c\/li\u003e\n\u003cli\u003eSP8 Fully supports WinXP\/Vista\/Win7\/Win10 and perfectly combines 32-\/64-bit systems.\u003c\/li\u003e\n\u003cli\u003eHas built-in 32-bit high-speed processors, designed especially for serial memories, achieving high-speed and appropriate programming, and has the highest programming speed in China.\u003c\/li\u003e\n\u003cli\u003eSupports nearly all 93\/24\/25\/BR90 memories, and supports more chips through a software upgrade.\u003c\/li\u003e\n\u003cli\u003eUnique ISP download ports and 10PIN colour ISP download cable. On-board patch chips (such as mainboard BIOS with SPI interface) can be directly connected to be programming.\u003c\/li\u003e\n\u003cli\u003eStandard 40Pin locking beds with zero insertion force, applicable to wide\/narrow chips and general adapters.\u003c\/li\u003e\n\u003cli\u003eSupports contact detection for pins, and improves the reliability of programming.\u003c\/li\u003e\n\u003cli\u003ePerfect over-current and ESD protection, and protection against accidental damages of programmers and computer USB ports.\u003c\/li\u003e\n\u003cli\u003eWith mass production programming, it automatically detects the position of chips and then starts programming.\u003c\/li\u003e\n\u003cli\u003eSupports mass asynchronous programming by connecting several programmers to one computer. Plug and write. No synchronous waiting. Top speed and high efficiency.\u003c\/li\u003e\n\u003cli\u003eYou can choose offline programming: built-in 128Mbit data memories achieve different kinds of field programming without connecting to a computer, and LED and buzzer present auditory signals of success or failure.\u003c\/li\u003e\n\u003cli\u003eIt operates easy and you can perform mass programming.\u003c\/li\u003e\n\u003cli\u003eSupports low-voltage (3.3V) and 5V chips.\u003c\/li\u003e\n\u003cli\u003eProvides self-detection for devices.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 24px;\"\u003e\u003cstrong\u003eSpecifications Of BIOS Setup Program SP8A:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Name: \u003c\/strong\u003eSP8-A Programmer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal Testing Certification:\u003c\/strong\u003e CE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType: \u003c\/strong\u003eLogic IC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDissipation Power: \u003c\/strong\u003eInternational Standard\u003c\/li\u003e\n\u003cli data-spm-anchor-id=\"a2g0o.detail.0.i16.37ea26b7AOqAcN\"\u003e\n\u003cstrong\u003eOperating Temperature:\u003c\/strong\u003e International Standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Computer\u003c\/li\u003e\n\u003cli data-spm-anchor-id=\"a2g0o.detail.0.i14.37ea26b7AOqAcN\"\u003e\n\u003cstrong\u003eSupply Voltage: \u003c\/strong\u003eInternational Standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Height:\u003c\/strong\u003e 15inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight: \u003c\/strong\u003e300 g\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003e\u003cspan style=\"font-size: 24px;\"\u003e\u003cstrong\u003eSupportive devices：\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.sofi-tech.com\/devlist.asp\" target=\"_blank\" rel=\"noopener\"\u003ehttp:\/\/www.sofi-tech.com\/devlist.asp\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan style=\"font-size: 24px;\"\u003e\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eOne SP8-A programmer.\u003c\/li\u003e\n\u003cli\u003eOne USB cable.\u003c\/li\u003e\n\u003cli\u003eOne 10Pin ISP download cable (10-chip 10-colour ribbon cable with 10 single DuPont heads at the output terminal).\u003c\/li\u003e\n\u003cli\u003eOne SOIC 8-16 SMD adapter (no soldering).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"content_files\" class=\"ty-wysiwyg-content content-files\"\u003e\u003c\/div\u003e\n\u003cdiv id=\"content_attachments\" class=\"ty-wysiwyg-content content-attachments\"\u003e\u003c\/div\u003e\n\u003ch6 id=\"content_required_products\" class=\"ty-wysiwyg-content content-required_products\"\u003e\u003cspan style=\"font-size: 8px; color: #ffffff;\"\u003eThe \u003ca style=\"color: #ffffff;\" href=\"https:\/\/yoast.com\/focus-keyword\/\"\u003efocus keyphrase\u003c\/a\u003e is the phrase that you want your post or page to be found for in search engines. Sometimes, it is a single word, but it usually consists of a few words. That’s why we call it a keyphrase. For example, if you want your blog post to rank for ‘healthy snacks’, then optimize your post for that term. Your focus keyphrase can also be longer. For instance, you could write an article about healthy snacks specifically made for kids and optimize for ‘healthy snacks for kids’. Or a post about healthy snacks to eat after a workout, and optimize for ‘healthy snacks after workout’. The \u003ca style=\"color: #ffffff;\" href=\"https:\/\/yoast.com\/focus-keyword\/\"\u003efocus keyphrase\u003c\/a\u003e is the phrase that you want your post or page to be found for in search engines. Sometimes, it is a single word, but it usually consists of a few words. That’s why we call it a keyphrase. For example, if you want your blog post to rank for\u003c\/span\u003e\u003c\/h6\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Electronics Hub","offers":[{"title":"Default Title","offer_id":54467036512569,"sku":"product-9950","price":7900.0,"currency_code":"PKR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/3623\/2249\/files\/aa.jpg?v=1789241795"},{"product_id":"xp8710-universal-professional-programmer-with-over-current-protection","title":"XP8710 Universal Professional Programmer with Over Current Protection in Pakistan","description":"\u003cp\u003eXP8710 Universal Professional Programmer with Over Current Protection can actually program more than 14100+ chips (as has been tested earlier by third party).\u003c\/p\u003e\n\u003ch2\u003eOverview:\u003c\/h2\u003e\n\u003cp\u003eWell-designed cheap professional programmer, Production of high-density SMD technology, a unified user interface, easy to use, fully functional, reliable program running of application software, ultra-small code - runs faster, it can automatically identify the operating system to install and run under the following OS\u003c\/p\u003e\n\u003ch3\u003eOperating systems supported\/ auto-detected:\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eWindows (2000,2003,2007,2008)\u003c\/li\u003e\n\u003cli\u003eWindows (XP, VISTA)\u003c\/li\u003e\n\u003cli\u003eWin 10 (32Bit\/64Bit).\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eFeatures of XP8710 Universal Professional Programmer:\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eprogramming speed\u003c\/strong\u003e is greatly improved. It is suitable for small batch production and supports 4 programmers for one computer.\u003c\/p\u003e\n\u003cp\u003eA wide range of chip support, the initial version supports the chip 15000+, supports a variety of:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e24 25 26 27 28 29 37 39 49 50 series of serial and parallel memory chips\u003c\/li\u003e\n\u003cli\u003emicrocontroller 51 series\u003c\/li\u003e\n\u003cli\u003eATMEL AVR ATMEGA AT90 series\u003c\/li\u003e\n\u003cli\u003eMICROCHIP PIC10 PIC12 PIC16 PIC18 series microcontroller\u003c\/li\u003e\n\u003cli\u003eGAL programmable logic device programming\u003c\/li\u003e\n\u003cli\u003eSRAM test\u003c\/li\u003e\n\u003cli\u003e54\/74 and CMOS4000 integrated circuit\u003c\/li\u003e\n\u003cli\u003eintegrated functional test\u003c\/li\u003e\n\u003cli\u003e25 series Nor Flash capacity support to 128Mbits\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: 32MB or larger capacity flash chip cannot be programmed by general programmers because of programming speed, while the XP8710 programmer can widely support 16MB Serial and parallel series of chips to 48PIN. It provides with the remarkable quality that is distinct from other common programmer.\u003c\/p\u003e\n\u003ch3\u003eUnique ultra-low power\/ \u003cstrong\u003epower requirements\u003c\/strong\u003e:\u003c\/h3\u003e\n\u003cp\u003eThe whole programmer is equipped with the \u003cstrong\u003eultra-low power\u003c\/strong\u003e chips and it is furnished with electricity via \u003cstrong\u003eUSB Interface\u003c\/strong\u003e. It is the first comprehensive programmer to program all the chips without an external power supply. Their own power consumption is less than 20mA (it is 7mA when the programmer is not programming, LED power indicator use largest electricity, 5mA each one) and Programming power loss rate is less than 20% so that the programmer can supply the high VCC VPP programming electric current. Programmable chip can be provided with enough programming power (the largest programming power output is 2 watts that is impossible for a chip to use 2 watts of programming power). And you hardly feel the heat of the programmer after such long continuous work.\u003c\/p\u003e\n\u003ch3\u003ePortable performance:\u003c\/h3\u003e\n\u003cp\u003eProgrammable programming power supply: VPP and VCC programming voltages are independently program-controlled: programmable VCC is from 3.3V to 6.5V; VPP is from 3.3V to 21V. The fluctuation of power supply is minor because of the multi-stage LC filter (inductor capacitor).\u003c\/p\u003e\n\u003ch3\u003eBest overvoltage, overcurrent protection\u003c\/h3\u003e\n\u003cp\u003eVCC, VPP power supply of the Programmer is furnished with the independent Grade 3 overcurrent protection and the protection of automatically power supply cut off. Each pin of 40-pin programming socket has VPP overvoltage protection. It can effectively prevent from putting a chip in the wrong place or short circuit due to other reason. In this programming case, it can also stop VPP high voltage from coming back to the internal of the programmer and damaging the device. This really makes sure that the programmer will not be damaged when there is any worst-case short circuit. At the same time, the programmed chip can be \u003cstrong\u003eefficiently protected\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThis programmer will cut off the programming power supply VPP and VCC within 100us (micro seconds) and send the message to the application program when there is short circuit. The programmer and PC won't be reset when there is short circuit because of the multilevel overcurrent protection.\u003c\/p\u003e\n\u003ch3\u003eChip serial number secondary development functions:\u003c\/h3\u003e\n\u003cp\u003eThis programmer is manufactured using a variety of commonly used automatic numbering function. And can use a custom algorithm to achieve any sequence number through DLL dynamic library. This feature allows you to produce a unique identification information for each chip in mass production. The \u003cstrong\u003elogo can also be encrypted\u003c\/strong\u003e with a custom algorithm to more effectively protect your product's rights.\u003c\/p\u003e\n\u003cp\u003eUniversal serial programming interface ICSP (to support high-voltage parallel programming).\u003c\/p\u003e\n\u003cp\u003eNote: ICSP now supports ATMEL89S51,52, AVR ATMEGAxxx Full Series, and MICROCHIP PIC10Fxxx 12Fxxx 16Fxxx 18Fxxx Full Series, and the new series of SYNCMOS SM59Dxx SM59Rxx full range chips for in-circuit serial programming.\u003c\/p\u003e\n\u003ch2\u003ePackage includes:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e5-pin jack cable\u003c\/li\u003e\n\u003cli\u003eProgrammer device\u003c\/li\u003e\n\u003cli\u003eConnecting cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Electronics Hub","offers":[{"title":"Default Title","offer_id":54467037954361,"sku":"product-9952","price":5400.0,"currency_code":"PKR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/3623\/2249\/files\/cx.jpg?v=1789241805"},{"product_id":"usb-to-rs232-converter-db9","title":"USB TO RS232 Converter DB9 in Pakistan","description":"\u003cp\u003eThis is HL-340 USB serial Converter also called USB to DB9 or USB to RS232 com port or USB to serial cable. You may add an rs232 based port on your laptop or computer which doesn't have a db9  9 pin com port using this USB to serial converter or USB to serial cable.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFeatures of USB TO RS232 Converter DB9 in Pakistan | Electronics Hub:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eSingle Crystal 12M Tablet 340 USB port to serial port communication.\u003c\/li\u003e\n\u003cli\u003eUSB1.1\/2.0 compliant solution.\u003c\/li\u003e\n\u003cli\u003eBuilt-in 128 bytes TX\/512 byte RX buffer.\u003c\/li\u003e\n\u003cli\u003eSupports the auto-Handshake Protocol.\u003c\/li\u003e\n\u003cli\u003eData Exchange application.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003chr\u003e\n\u003ch4\u003e\u003cstrong\u003ePackage Includes :\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1 x USB Serial Port (COM) USB to RS232 USB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDriver Download Link.\u003c\/h2\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0965\/3623\/2249\/files\/CH341SER.zip?v=1789241810\" target=\"_blank\" rel=\"noopener\"\u003eCLICK ME FOR DOWNLOAD\u003c\/a\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch6\u003e\u003cspan style=\"font-size: 8px; color: #ffffff;\"\u003eThe \u003ca style=\"color: #ffffff;\" href=\"https:\/\/yoast.com\/focus-keyword\/\"\u003efocus keyphrase\u003c\/a\u003e is the phrase that you want your post or page to be found for in search engines. Sometimes, it is a single word, but it usually consists of a few words. That’s why we call it a keyphrase. For example, if you want your blog post to rank for ‘healthy snacks’, then optimize your post for that term. Your focus keyphrase can also be longer. For instance, you could write an article about healthy snacks specifically made for kids and optimize for ‘healthy snacks for kids’. Or a post about healthy snacks to eat after a workout, and optimize for ‘healthy snacks after workout’. but it usually consists of a few words. That’s why we call it a keyphrase. For example, if you want your blog post to rank for ‘healthy snacks’, then optimize your post for that term. Your focus keyphrase can also be longer. For instance, you could write an article about healthy snacks specifically made for kids and optimize for ‘healthy snacks for kids’.\u003c\/span\u003e\u003c\/h6\u003e","brand":"Electronics Hub","offers":[{"title":"Default Title","offer_id":54467040117049,"sku":"product-9954","price":350.0,"currency_code":"PKR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/3623\/2249\/files\/z.jpg?v=1789241818"}],"url":"https:\/\/electronicshub.pk\/collections\/programmers.oembed","provider":"Electronics Hub","version":"1.0","type":"link"}